The buoyancy tube of your boat is made of fabric using imputrescible plastomer. Maintenance is easy but essential.
Cleaning:
Every month: (for intensive use) but obligatory before winter
NEVER USE STRONG DETERGENTS (ACID, TRICHLORETHYLENE, MINERAL SPIRIT) OR SILICONE-BASED PRODUCTS.
Inflate the buoyancy tube:
- Open the self bailer and wash the boat with a hose to remove sand and other particles
- Remove the Aerotec airfloor
- Remove all traces of tar (use the ACCESS product from your Dealer if required)
- Rinse with fresh water and dry thoroughly
NEVER USE HIGH PRESSURE CLEANING EQUIPMENT LIKELY TO DAMAGE THE BOAT.
When deflating:
- Check that the valves and gaskets are clean and not damaged
- Check the self bailer is not clogged
Notes
DROP IN PRESSURE:
A 20% air pressure loss in a 24-hour period is normal.
Only deal with more serious air leakages:
- Buoyancy tube = 10 mb/5 hours
- Aerotec airfloor = 35 mb/5 hours
If you have a problem with an air leakage, first, check all valves are intact and in closed position (nothing clogging valve).
Do not hesitate to contact your Dealer.
Storage:
When storing your boat, keep it in a clean and dry place that is not affected by major variations in temperature and other damaging factors. You may store the boat deflated and rolled up or lightly inflated.
Precaution
FOR LONG TERM STORAGE IN THE SUN (ESPECIALLY IN TROPICAL REGIONS), PROTECT YOUR BOAT WITH A TARPAULIN
RODENTS MAY CHEW FABRIC INCLUDING INFLATABLE BOAT MATERIAL. STORE AWAY FROM RODENTS.